Powermatic PM1300TX-CK3 Dust Collector, 3HP 3PH 230/460V, 2-Micron Canister Kit

Powermatic Model: PM1300TX-CK3

Enter your email address and we'll let you know when it's available

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Powermatic PM1300TX-CK3 Dust Collector, 3HP 3PH 230/460V, 2-Micron Canister Kit Powermatic Model: PM1300TX-CK3

Product Features & specs :

Powermatic PM1300TX-CK3 Dust Collector, 3HP 3PH 230/460V, 2-Micron Canister Kit

Details

The PM1900 Dust Collector is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines. The exclusive TurboCone improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bags. The canister filter offers superior filtering surface area over standard bags, and captures 98% of 2-micron particles. The all-metal duct improves rigidity and air flow. The clear collector bags are large capacity, which means less down-time changing them. Four swivel casters and conveniently located handles allow for easy mobility.

TurboCone is an exclusive, innovative technology in the realm of dust management.

Features:

  • TurboCone improves chip separation and collector bag packing efficiency

  • The cone eliminates premature filter clogging for sustained performance

  • All-metal duct construction for rigidity and improved air flow

  • 2-micron canister filters offer over six times filtering surface area of standard bags

  • The large impeller is powered by a 3HP motor for peak performance

  • Triple 4 in. dust ports allow for several hoses to be attached at the same time

  • Collection bags use a snap ring for rapid installation/removal

  • 10 cubic ft. capacity collection bag reduces number of bag changes.

  • Four swivel casters for shop maneuverability

What’s Included:

  • PM1900TX-CK3 Dust Collector, 3HP 3PH 230/460V, 2-Micron Canister Kit - 1792074K

Sealed Pressure (Water Lift)

12.15 in

Power Source

Corded

Amperage

15

Wifi compatibility

No

Hose Diameter

3-Hoses - 4 in/1-Hose - 8 in

Bluetooth Compatibility

No

Motor Type

Single Phase

Color

Brown

Case Included

No

Horsepower

3

Voltage

230V/460V

Air Flow (CFM)

1891

Bag Capacity/Dry Volume(cu.ft.)

10

Dust Collection Type

Bag

Noise Rating (dBA)

86

Length

61 in.

Width

30 in.

Height

94 in.

Weight

264 lbs.

Warranty Term

5 Year

Reviews :

Q & A :

Warranty:

Powermatic 5 Year Warranty


WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.


Five Year Warranty for Non-Industrial Tools
(Vertical Panel Saws, Bandsaws, Jointers, Planers, Planer/Molder, Dust Collection, Disc Sanders, Edge Sanders, Drum Sanders, Shapers, Drill Presses, Mortisers, Dovetailers)


WHAT IS COVERED

This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.


WHO IS COVERED

This warranty covers only the initial purchaser of the product.


WHAT IS THE PERIOD OF COVERAGE

The general POWERMATIC warranty lasts for the time period specified in the product literature of each product.


WHAT IS NOT COVERED

The Five Year Warranty does not cover products used for commercial, industrial or educational purposes. Products with a Five Year Warranty that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.


HOW TO GET SERVICE

The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.


You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.

HOW STATE LAW APPLIES

This warranty gives you specific legal rights; you may also have other rights which vary from state to state.


LIMITATIONS ON THIS WARRANTY

WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.


WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.