JET JSG-96CS 6 in. x 48 in. Belt / 9 in. Disc Combination Sander with Closed Stand

JET Model: JSG-96CS

Enter your email address and we'll let you know when it's available

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
JET JSG-96CS 6 in. x 48 in. Belt / 9 in. Disc Combination Sander with Closed Stand JET Model: JSG-96CS

Product Features & specs :

JET JSG-96CS 6 in. x 48 in. Belt / 9 in. Disc Combination Sander with Closed Stand

Features:

  • Large cast-iron table has preset stops at 90 Degrees and 45, to let you use the belt sander vertically, horizontally or anywhere in between

  • Drive drum is rubber-coated for a better grip on the sanding belt, resulting in less slippage

  • Belt sander platen features a graphite sheet to help the unit run cooler for increased machine and belt life

  • Tracking adjustment knob with quick-lock handle keeps belt on track during use

  • Quick-release belt tension lever makes belt changes fast and easy

  • Quick-lock dust cover allows fast disc changes

  • Single 4 in. dust port on the back of the base collects dust effectively from either machine

  • Powerful 3/4 HP motor handles even the toughest sanding jobs

  • Built-in handles for easier portability

  • One-piece formed steel heavy-duty closed stand provides additional support and additional storage for abrasives

What’s Included:

  • 6 in. x 48 in. Belt / 9 in. Disc Combination Sander w/ Closed Stand - 708597K

  • Sanding Belt

  • Sanding Disc

  • Miter Gauge

  • Horizontal Backstop

  • Circle Jig

  • Heavy-Duty Closed Stand

Power Source

Corded

PreWired Voltage

120V

Table Type

Cast Iron

Amperage

11

UL Safety

No

Belt Operating Speed (SPM)

2258

Wifi compatibility

No

Belt Table Dimensions

11 in x 5-1/2 in

Disc Table Tilt (Up)

10 Degrees

Disc Table Dimensions

12 in x 7-1/2 in

Bluetooth Compatibility

No

Motor Type

Brushed

Disc Operating Speed (RPM)

1725

Belt Length

48 in

Disc Table Tilt (Down)

45 Degrees

CSA Safety

No

Belt Width

6 in

Dust Port Size

4 in

Motor Phase

1

Belt Table Tilt (Up)

10 Degrees

Horsepower

0.75

Voltage

120V

Belt Table Tilt (Down)

45 Degrees

ETL Safety

No

Length

16 in.

Width

29 in.

Height

28.50 in.

Weight

128 lbs.

Warranty Term

5 Year

Reviews :

Q & A :

Warranty:

JET RED ASSURANCE Program


Do you know about the JET RED ASSURANCE Program? Well, the JET RED ASSURANCE Program was designed to make sure you do! JET has the best and most dependable service in the Industry and they want to make sure you know about it. In addition, to their standard warranty JET offers the Industry's most dependable service and support guarantee. Click here to learn more about what JET RED ASSURANCE can do for you!


5-Year

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET® tools. For the name of an Authorized Service Center in your area, call 1-800-274-6848.

MORE INFORMATION
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WARRANTY

This JET product carries a limited five-year warranty.

WHAT IS COVERED
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WHO IS COVERED
This warranty covers only the initial purchaser of the product.

WHAT IS THE PERIOD OF COVERAGE
The general JET warranty lasts for the time period specified in the product literature of each product.

WHAT IS NOT COVERED
Five Year Warranties do not cover woodworking (WW) products used for commercial, industrial or educational purposes. Woodworking products with Five Year Warranties that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.

HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.

HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.

LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.